The Daniamant ML-100 marker light series has high intensity LEDs and is powered by 3 D-Sized 1.5V Battery Cells. (Batteries not included) The Daniamant ML-100 standard series consist of:

• Daniamant ML-100 yellow LED 25 flash at 5 candela marking light.
• Daniamant ML-100 white LED 25 flash at 5 candela marking light.
• Daniamant ML-100 fixed red LED 5 candela marking light.
• Daniamant ML-100 Synch Master.

Optional part:

• Daniamant ML-100 Floater.

The following marker light features can be changed by programming:

• Light-intensity
• Flash-rate
• Synchronization as master/slave
• Daylight switch (with adjustable ambient light level for ON/OFF)

The Daniamant ML-100 series is developed for marking of e.g. nets and long line fishing equipment, buoys, seismic cables, anchor chains and moorings, aquaculture farms, oil cables and offshore installations. The ML-series has a module-based construction, which makes these marking lights user-friendly during any service and repair. NATO Stock Numbers (NSN): 86430: Tron ML-100 White LED 25-flash at 5 Cd. NSN: 6230-25-127-7786 87331: Tron ML-100 Yellow LED 25-flash at 5 Cd. NSN: 6230-25-161-4313 98885: Floater for ML-100. NSN: 2050-25-160-6877

When is a Daniamant ML-100 Synch Master needed?

If one ML-light is programmed as “Master” and the other lights are programmed as “Slaves” and the distance between “Master” and “Slaves” are less than 90-100 meters, synchronization should function OK. All lights in the ML-series (ML-100, ML-200 and ML-300) can be programmed as either “Master” or “Slave”. If the distance between “Master” and “Slaves” is between 100-450 meters, a dedicated Synch-Master must be used. This device can be powered at 4.5 VDC or 10-27 VDC battery and fit to the houses used for the ML-100, ML-200 and ML-300