Marine
ICOM IC-F52D UL/IC-F62D UL
Model Seri: ICOM-IC-F52D-UL-IC-F62D-UL
Kategori: Marine
Hubungi Kami
Konsultasikan kebutuhan radio komunikasi Anda dengan tim teknisi ahli kami secara langsung untuk mendapatkan penawaran terbaik.
OVERVIEW & SPESIFIKASI
UL Approved Intrinsically Safe Digital Radio with 5 W Output Power and Compact Design
The IC-F52D-UL/F62D-UL is a UL approved intrinsically safe radio. A full 5 W of output power is available with this approval. Other safety features such as Man Down, Lone Worker and Emergency Call functions help your team remain connected in hazardous locations. Small, light and feature packed Multiple operating modes*1 • Analog FM • NXDN™/dPMR™ conventional • Upgradable to NXDN ™ Type-D trunking • Upgradable to dPMR ™ Mode 3 trunking*2 *1 NXDN/dPMR modes are not compatible with each other. The radio protocol/ mode cannot be changed after purchase. *2 Not available in all regions. Full dot-matrix display, rotary channel and volume knob for simple every-day operation Built-in Bluetooth® capability, Voice Recording, Active Noise Cancelling functions Motion/Stationary Detection, Man Down and Lone Worker functions OTAP (Over-the-Air Programming) function easily reconfigures in-the-field radios Intelligent battery management helps extend the battery lifeSpecification
General
| IC-F52D | IC-F62D | ||
|---|---|---|---|
| Frequency coverage* (* Depending on version) | 136–174 MHz | (NXDN Version) 350–400, 400–470, 450–512, 450–520 MHz (dPMR Version) 400–470 MHz | |
| Number of channels | 512 channels /128 zones | ||
| Type of emission* (* Depending on version) | (NXDN Version) 16K0F3E*, 14K0F3E, 11K0F3E, 8K50F3E, 8K30F1E/D, 4K00F1E/D (dPMR Version) 16K0F3E*, 14K0F3E, 8K50F3E, 4K00F1E/D * 25 kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. | ||
| Power supply requirement | 7.5 V DC nominal | ||
| Current drain (approx.) | Tx | 1.8 A | |
| Rx | 500 mA /170 mA (Max. audio (internal SP)/Standby) | ||
| Antenna impedance | 50 Ω | ||
| Operating temperature range | −30 °C to +60 °C; −22 °F to +140 °F (Radio specifications) | ||
| Dimensions (W × H × D; Projections not included) | 56 × 91.5 × 36.5 mm; 2.2 × 3.6 × 1.4 in (With BP-294) | ||
| Weight (approx.) | 125 g; 4.4 oz (main unit) | ||
| 270 g; 9.5 oz (BP-294, MBB-3) | |||
Transmitter
| IC-F52D | IC-F62D | |
|---|---|---|
| Output power (Hi, L2, L1) | 5 W, 2 W, 1 W | |
| Frequency stability | ±1.0 ppm | |
| Spurious emissions | 80 dB typ. (USA) | |
| 0.25 μW (≤ 1 GHz), 1.0 μW (> 1 GHz) (EUR) | ||
| FM Hum and noise | 57 dB typ. (@25 kHz), 55 dB typ. (@12.5 kHz) (USA) | 57 dB typ. (@25 kHz), 56 dB typ. (@12.5 kHz) (USA) |
| Audio harmonic distortion | 0.4% typ. (AF 1 kHz 40% deviation) | |
| FSK error | 1% typ. (@DVN, DN) | |
Receiver
| IC-F52D | IC-F62D | ||
|---|---|---|---|
| Sensitivity | Analog (12 dB SINAD) | 0.23 μV typ. | |
| Analog (20 dB SINAD) | −4.0 dBμV emf typ. (@25 kHz), −1.4 dBμV emf typ. (@12.5 kHz) | −4.0 dBμV emf typ. (@25 kHz), −1.1 dBμV emf typ. (@12.5 kHz) | |
| Digital (1% BER) | −5.0 dBμV emf typ. (0.28 μV typ. ) (@DVN), −3.0 dBμV emf typ. (0.35 μV typ. ) (@DN) | −4.0 dBμV emf typ. (0.32 μV typ. ) (@DVN), −3.0 dBμV emf typ. (0.35 μV typ. ) (@DN) | |
| Adjacent channel | Analog | 79 dB typ. (@25/20 kHz), 77 dB typ. (@12.5 kHz) | 76 dB typ. (@25/20 kHz), 73 dB typ. (@12.5 kHz) |
| Digital | 70 dB typ. (@DVN), 72 dB typ. (@DN) | 66 dB typ. (@DVN), 68 dB typ. (@DN) | |
| Spurious response rejection | 76 dB typ. | 78 dB typ. | |
| Intermodulation rejection | Analog | 76 dB typ. (USA) 68 dB typ. (EUR) | 74 dB typ. (USA) 68 dB typ. (EUR) |
| Digital | 73 dBμV emf typ. (@DVN)/−40 dBm typ. (@DN) | ||
| Audio output power | Internal SP | 1300 mW typ. (at 5% distortion, 8 Ω load) | |
| External SP | 1000 mW typ. (at 5% distortion, 8 Ω load) 1300 mW typ. (at 5% distortion, 8 Ω load) with HM-222H* | ||
Applicable U.S. Military Specifications & IP Rating
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
Also meets equivalent MIL-STD-810-C, -D -E and -F.
| Standard | MIL-810 G | |
|---|---|---|
| Method | Procedure | |
| Low Pressure | 500.5 | I, II |
| High Temperature | 501.5 | I, II |
| Low Temperature | 502.5 | I, II |
| Temperature Shock | 503.5 | I-C |
| Solar Radiation | 505.5 | I |
| Rain Blowing/Drip | 506.5 | I, III |
| Humidity | 507.5 | II |
| Salt Fog | 509.5 | – |
| Dust Blowing | 510.5 | I |
| Immersion | 512.5 | I |
| Vibration | 514.6 | I |
| Shock | 516.6 | I, IV |
Applicable IP Rating
| Ingress Protection Standard | |
|---|---|
| Dust & Water | IP67/66/55/54 |
Supplied Accessories
- Battery pack, BP-290
- Belt clip, MBB-3
More from Marine
Produk Serupa
ICOM IC-M802 HF Marine Transceiver
Detail & Spesifikasi
ICOM IC-M802 General Version HF Marine Transceiver
Detail & Spesifikasi
ICOM IC-M73
Detail & Spesifikasi
ICOM IC-M37
Detail & Spesifikasi
×
![]()
ICOM IC-F52D UL/IC-F62D UL